课程信息
4.8
14 个评分
1 个审阅
100% 在线

100% 在线

立即开始,按照自己的计划学习。
可灵活调整截止日期

可灵活调整截止日期

根据您的日程表重置截止日期。
完成时间(小时)

完成时间大约为19 小时

建议:5 weeks 2-5 hours per week...
可选语言

英语(English)

字幕:英语(English)
100% 在线

100% 在线

立即开始,按照自己的计划学习。
可灵活调整截止日期

可灵活调整截止日期

根据您的日程表重置截止日期。
完成时间(小时)

完成时间大约为19 小时

建议:5 weeks 2-5 hours per week...
可选语言

英语(English)

字幕:英语(English)

教学大纲 - 您将从这门课程中学到什么

1
完成时间(小时)
完成时间为 4 小时

Introduction to Applying TPS or Lean to Healthcare

Toyota Production System (TPS) or Lean has allowed Toyota to become the number one automobile manufacturer in the world by progressively improving the quality and reliability of their products. The System of Profound Knowledge developed by the American, W. Edward Deming is the basis for TPS or Lean. This system has now been adapted to healthcare by Virginia Mason Medical Center and Denver Health with exciting results. You will be introduced to the 4 principles of TPS, as well as the TPS House that illustrates how the various tools of TPS fit together to continually add value to the care of patients. The challenges faced by both health systems will be discussed and their approaches to transforming their delivery systems described. When Lean is applied to healthcare, patient care improves, and both patient mortality and the cost of care decrease. Applying Lean to healthcare systems can revolutionize how healthcare is delivered. ...
Reading
5 个视频 (总计 42 分钟), 3 个阅读材料, 2 个测验
Video5 个视频
Why Toyota Production System (Lean)?9分钟
What are the Fundamental Principles of Lean (TPS)?11分钟
How Does a Health System Implement Lean (TPS)?9分钟
How and Why Did Denver Health Adopt Lean?6分钟
Reading3 个阅读材料
Implementing Lean (TPS)10分钟
Additional Resources10分钟
Glossary of Lean Terms10分钟
Quiz1 个练习
Introduction to Applying TPS or Lean to Healthcare20分钟
2
完成时间(小时)
完成时间为 4 小时

Waste Reduction

Waste is a huge problem in modern health care. It has been estimated that 30-60% of all that we do is wasteful and is not of value. Lean has categorized 8 forms of waste allowing everyone on the front lines to recognize waste and work to remove it. 5S is a very helpful tool that can be used early in the implementation of lean and can remove clutter and quickly improve efficiency. A major form of waste is the excessive use of diagnostic tests, as well as delayed or missed diagnosis. In this session you will be introduced to the 8 forms of waste, the use of 5S, how illness scripts can be used to create a tiered diagnostic list, and how Bayes Theorem can be used to select the highest yield tests. Using this approach diagnosticians can more quickly and cost effectively arrive at diagnoses. Waste is the foundation of Lean and by removing waste we can progressively increase the value of patient care. ...
Reading
5 个视频 (总计 46 分钟), 2 个阅读材料, 2 个测验
Video5 个视频
5S8分钟
Reducing Waste in Diagnostic Testing (Part 1)9分钟
Reducing Waste in Diagnostic Testing (Part 2)7分钟
Reducing Waste in Diagnostic Testing (Part 3)9分钟
Reading2 个阅读材料
Lesson 2 Waste Reduction10分钟
Additional Resources10分钟
Quiz1 个练习
Waste in Health Care20分钟
3
完成时间(小时)
完成时间为 3 小时

Standardized Work and Preparing for Value Stream Mapping

Standardized work is an absolute necessity for improvement. Without standardized work there can be no improvement. This is one of the most difficult concepts to relay to those on the front lines particularly physicians, who call this "cookbook medicine". In this module the philosophy behind creating standardized work is reviewed, and the importance of everyone on the front line participating in creating and continually modifying standardized work emphasized. You will be introduced to tools that will help you to effectively design standardized work: the spaghetti diagram and the Time Observation Sheet. Lead Time, Cycle Time and Takt Time will be defined. You will learn how time the individual steps of a work process. You will also learn how to use a percentage load chart to calculate how many workers are required to meet production demand. ...
Reading
5 个视频 (总计 36 分钟), 1 个阅读材料, 2 个测验
Video5 个视频
Standardized Work (Part 2)6分钟
Standardized Work (Part 3)7分钟
Standardized Work (Part 4)6分钟
Medication Administration Video6分钟
Reading1 个阅读材料
Standardized Work10分钟
Quiz1 个练习
Standardized Work20分钟
4
完成时间(小时)
完成时间为 3 小时

Value Stream & Process Mapping, RIEs, and Leveling Flow

Value stream mapping is at the heart of TPS or Lean. Using the Time Observation Sheets you will learn how to fill out a Value Stream Map, including determining WIP (work in progress) depicting physical movement and process flow along with information flow, and assessing when work is value-added and when it is non-value added. Value stream maps are used to identify bottlenecks and wasteful steps in a work process and then process mapping and rapid improvement events (RIEs) can be used to remove these wasteful processes and impediments to workflow. Finally you will be introduced to the principles of leveling both under elective and emergency treatment conditions. Applying these tools can dramatically improve efficiency and productivity without increasing overall manpower. ...
Reading
7 个视频 (总计 50 分钟), 1 个阅读材料, 2 个测验
Video7 个视频
Value Streams (Part 2)6分钟
Process Mapping7分钟
Rapid Improvement Events (RIE)8分钟
Leveling Flow (Part 1)4分钟
Leveling Flow (Part 2)6分钟
Leveling Clinic Flow - Lakesha Cotton8分钟
Reading1 个阅读材料
Value stream and Process Mapping, and RIEs10分钟
Quiz1 个练习
Value Stream & process mapping, RIE, and leveling20分钟

讲师

Avatar

Frederick S. Southwick, MD

Professor
College of Medicine

关于 University of Florida

The University of Florida (UF) is recognized nationally and internationally as a leader in academic excellence, both on campus and online. Ranked in the top 20 of Public Universities, the University of Florida is the state’s oldest university and has a long established tradition of academic excellence. ...

常见问题

  • 注册以便获得证书后,您将有权访问所有视频、测验和编程作业(如果适用)。只有在您的班次开课之后,才可以提交和审阅同学互评作业。如果您选择在不购买的情况下浏览课程,可能无法访问某些作业。

  • 您购买证书后,将有权访问所有课程材料,包括评分作业。完成课程后,您的电子课程证书将添加到您的成就页中,您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容,可以免费旁听课程。

还有其他问题吗?请访问 学生帮助中心