课程信息

1,594 次近期查看

100% 在线

立即开始,按照自己的计划学习。

可灵活调整截止日期

根据您的日程表重置截止日期。

高级

完成时间大约为12 小时

建议:4 weeks of study...

英语(English)

字幕:英语(English)

您将学到的内容有

  • Check
    Create and drive a mechanical gear assembly.
  • Check
    Create and modify a form-based design.
  • Check
    Use design tools for molded parts.
  • Check
    Demonstrate proficiency in the setup and creation of a design.

您将获得的技能

AutodeskComputer-Aided Design (CAD)Fusion 360Mechanical EngineeringModeling

100% 在线

立即开始,按照自己的计划学习。

可灵活调整截止日期

根据您的日程表重置截止日期。

高级

完成时间大约为12 小时

建议:4 weeks of study...

英语(English)

字幕:英语(English)

讲师

授课教师 Autodesk 的图片

Autodesk 
顶尖授课教师

24,851 个学生
22 门课程

提供方

Autodesk 徽标

Autodesk

教学大纲 - 您将从这门课程中学到什么

1

1

完成时间为 6 小时

The Basics of Modeling

完成时间为 6 小时
21 个视频 (总计 126 分钟), 7 个阅读材料, 2 个测验
21 个视频
Get the software2分钟
Week 1 overview40
Project Overview13分钟
Creating parameters11分钟
Linking parameters and dimensions6分钟
Using symmetry and construction geometry11分钟
Sketch visibility options for quick updates3分钟
Creating construction planes7分钟
Creating extruded features11分钟
Create extruded cuts11分钟
Projecting edges vs. including them7分钟
Creating a revolved solid10分钟
Using Boundary Fill4分钟
Creating Sheet Metal Parts11分钟
Practice exercise 1 overview22
Practice exercise 1 solution3分钟
Practice exercise 2 overview20
Practice exercise 2 solution3分钟
Practice exercise 3 overview15
Practice exercise 3 solution3分钟
7 个阅读材料
The Basics of Modeling resources5分钟
About the discussion forum10分钟
Online learning communities and social media10分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 1 Challenge exercise1 小时 30 分
2 个练习
Pre-course questions5分钟
Week 1 quiz10分钟
2

2

完成时间为 5 小时

The Basics of Assemblies

完成时间为 5 小时
21 个视频 (总计 107 分钟), 5 个阅读材料, 1 个测验
21 个视频
The different ways to create components9分钟
Using scripts to create gears8分钟
Component color swatch and color cycling4分钟
Using McMaster-Carr parts in a design8分钟
Copy paste and paste new7分钟
Distributed designs8分钟
Derived Designs5分钟
Creating as-built joints4分钟
Creating joints8分钟
Joint origins and midplane joints8分钟
Driving joints and motion studies4分钟
Interference detection and contact sets5分钟
Isolation and opacity control6分钟
Creating groups and organizing a timeline4分钟
Practice exercise 1 overview23
Practice exercise 1 solution1分钟
Practice exercise 2 overview19
Practice exercise 2 solution5分钟
Practice exercise 3 overview27
Practice exercise 3 solution4分钟
5 个阅读材料
The Basics of Assemblies resources5分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 2 challenge exercise1 小时 30 分
1 个练习
Week 2 quiz
3

3

完成时间为 5 小时

Exploring Design Tools for Production

完成时间为 5 小时
17 个视频 (总计 90 分钟), 5 个阅读材料, 1 个测验
17 个视频
Creating draft during a feature6分钟
Creating draft as a feature10分钟
Adding ribs and plastic supports7分钟
Analyzing draft on a design11分钟
Creating holes and threads6分钟
Using a coil feature6分钟
Mirrors and patterns8分钟
Surface creation for complex geometry9分钟
Using surfaces to replace faces3分钟
Using surfaces to split bodies and faces4分钟
Practice exercise 1 overview20
Practice exercise 1 solution5分钟
Practice exercise 2 overview20
Practice exercise 2 solution3分钟
Practice exercise 3 overview19
Practice exercise 3 solution5分钟
5 个阅读材料
Exploring Design Tools for Production resources5分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 3 challenge exercise1 小时 30 分
1 个练习
Week 3 quiz10分钟
4

4

完成时间为 7 小时

Creating complex designs with form tools

完成时间为 7 小时
17 个视频 (总计 71 分钟), 5 个阅读材料, 3 个测验
17 个视频
Introduction to forms4分钟
Creating a form primitive4分钟
Adding or removing symmetry3分钟
Manipulating faces, edges, and vertices6分钟
Converting BREP faces to forms7分钟
Creasing or uncreasing an edge8分钟
Inserting edges and subdivisions8分钟
Repairs and modifications6分钟
Adding a bevel5分钟
Working with a form as a BREP7分钟
Practice exercise 1 overview24
Practice exercise 1 solution1分钟
Practice exercise 2 overview17
Practice exercise 2 solution1分钟
Practice exercise 3 overview28
Practice exercise 3 instructions2分钟
5 个阅读材料
Creating complex designs with form tools resources10分钟
Practice exercise 1 overview30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 4 challenge assignment1 小时 30 分
2 个练习
Week 4 quiz10分钟
Course assessment40分钟

关于 Autodesk CAD/CAM/CAE for Mechanical Engineering 专项课程

The demand placed on today’s engineers goes above and beyond the job description. Products have become complex and engineers are more frequently asked to leave specialized roles and to take on a wide variety of tasks that are beyond their traditional responsibilities. These tasks are centered on form, fit, and function. Engineers need to factor in broader concerns such as cost, procurement, sustainability, manufacturability, and serviceability. Their role has moved away from an individual responsibility to working as part of a collaborative engineering team, executing tradeoffs with both engineering and business stakeholders to meet project goals. These trends have forced today’s engineers to broaden their skillset to be successful. Engineers today are required to be on the cutting edge of design innovation. This means not only understanding engineering principles that govern the title and role, but also perfecting the toolsets needed to design and develop products. Through this specialization, you’ll learn the foundations of applying computer aided design (CAD), computer aided engineering (CAE), and manufacturing principles while developing your technical skills within Autodesk Fusion 360....
Autodesk CAD/CAM/CAE for Mechanical Engineering

常见问题

  • 注册以便获得证书后,您将有权访问所有视频、测验和编程作业(如果适用)。只有在您的班次开课之后,才可以提交和审阅同学互评作业。如果您选择在不购买的情况下浏览课程,可能无法访问某些作业。

  • 您注册课程后,将有权访问专项课程中的所有课程,并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中,您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容,可以免费旁听课程。

还有其他问题吗?请访问 学生帮助中心