课程信息

26,257 次近期查看
可分享的证书
完成后获得证书
100% 在线
立即开始,按照自己的计划学习。
可灵活调整截止日期
根据您的日程表重置截止日期。
高级
完成时间大约为26 小时
英语(English)
字幕:英语(English)

您将学到的内容有

  • Recognize multi-axis geometry.

  • Identify 3+2 vs. Simultaneous machining.

  • Practice the application of multi-axis toolpaths.

您将获得的技能

Computer-aided manufaturingEngineeringManufacturing processAutodesk Fusion 360Mechanical Engineering
可分享的证书
完成后获得证书
100% 在线
立即开始,按照自己的计划学习。
可灵活调整截止日期
根据您的日程表重置截止日期。
高级
完成时间大约为26 小时
英语(English)
字幕:英语(English)

提供方

Autodesk 徽标

Autodesk

教学大纲 - 您将从这门课程中学到什么

1

1

完成时间为 6 小时

Creating Multi-Axis Positioning Toolpaths

完成时间为 6 小时
23 个视频 (总计 99 分钟), 7 个阅读材料, 2 个测验
23 个视频
Get the software2分钟
Week 1 overview34
Importing a tool library to the cloud3分钟
Creating a new CAM setup for multi-axis5分钟
Creating a 3D adaptive clearing operation5分钟
Create a 2D contour on a complex part8分钟
2-axis pocketing5分钟
Drilling and tapping in 3 axes7分钟
5-axis drilling6分钟
Creating a pattern of toolpaths3分钟
Comparing posted code for multi-axis positioning5分钟
Creating a 3-plus-2 pocketing toolpath6分钟
Patterning a pocket toolpath4分钟
Creating a multi-axis contour11分钟
Create a pocket operation in the side of a part10分钟
Finishing off multi-axis positioning toolpaths4分钟
Practice exercise 1 video instructions15
Practice exercise 1 solution1分钟
Practice exercise 2 video instructions16
Practice exercise 2 solution1分钟
Practice exercise 3 video instructions16
Practice exercise 3 solution3分钟
7 个阅读材料
Creating Multi-Axis Positioning Toolpaths resources2分钟
About the discussion forum10分钟
Online learning communities and social media10分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 1 challenge exercise2小时
2 个练习
Pre-course questions10分钟
Week 1 quiz10分钟
2

2

完成时间为 5 小时

Simultaneous Multi-Axis Toolpaths

完成时间为 5 小时
19 个视频 (总计 69 分钟), 5 个阅读材料, 1 个测验
19 个视频
Setting up a multi-axis contour toolpath6分钟
Controlling the lead or lag of the tool7分钟
Controlling maximum tilt during a multi-axis contour5分钟
Using shaft and holder clearance4分钟
Setting up a new CAM program2分钟
Creating a swarf toolpath with contour selection5分钟
Creating a swarf toolpath with surface selection2分钟
Controlling a flow toolpath for 3 axes4分钟
Setting up a new CAM program with a generative design part3分钟
Controlling a flow toolpath for 5 axes9分钟
Avoiding collisions3分钟
Multi-axis flow for 3 vs 5 axes7分钟
Practice exercise 1 video instructions15
Practice exercise 1 solution1分钟
Practice exercise 2 video instructions15
Practice exercise 2 solution2分钟
Practice exercise 3 video instructions15
Practice exercise 3 video instructions1分钟
5 个阅读材料
Simultaneous Multi-Axis Toolpaths resources2分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 2 challenge exercise2小时
1 个练习
Week 2 quiz10分钟
3

3

完成时间为 5 小时

Creating Multiple Setups

完成时间为 5 小时
17 个视频 (总计 75 分钟), 5 个阅读材料, 1 个测验
17 个视频
Creating a distributed design4分钟
Create soft jaw geometry10分钟
Add a probing location3分钟
Create a CNC Mill setup4分钟
Rough and Finish a basic part from the bottom10分钟
Create a second setup in Fusion 3602分钟
Clear and finish a part8分钟
Export an NC file for specific toolpaths6分钟
Using multiple WCS offsets8分钟
Creating multiple copies of the same setup with WCS offsets5分钟
Practice exercise 1 video Instructions16
Practice exercise 1 solution2分钟
Practice exercise 2 video instructions17
Practice exercise 2 solution3分钟
Practice exercise 3 video instructions16
Practice exercise 3 solution1分钟
5 个阅读材料
Creating Multiple Setups resources2分钟
Practice exercise 1 Instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 3 challenge exercise2小时
1 个练习
Week 3 quiz10分钟
4

4

完成时间为 10 小时

Creating Multiple Setups for Multiple Machines

完成时间为 10 小时
23 个视频 (总计 112 分钟), 6 个阅读材料, 5 个测验
23 个视频
Creating a body for stock setup3分钟
Setting up for a CNC mill3分钟
Rough and finish a retaining feature6分钟
Creating a new setup for final machining4分钟
Creating a probe operation7分钟
Roughing and finishing a multi-axis part10分钟
Using folders in a setup4分钟
Creating an NC program7分钟
Creating multiple setup sheets5分钟
Viewing toolpaths in A3604分钟
Surface creation for toolpath setup9分钟
Practice exercise 1 video instructions16
Practice exercise 1 solution1分钟
Practice exercise 2 video instructions16
Practice exercise 2 solution1分钟
Practice exercise 3 video instructions20
Practice exercise 3 solution4分钟
Accessing manufacturing extensions1分钟
Creating an additive setup9分钟
Create a hole recognition toolpath7分钟
Create a steep and shallow toolpath9分钟
Use probing to locate features and inspect parts6分钟
6 个阅读材料
Creating Multiple Setups for Multiple Machines resources2分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 4 challenge exercise2小时
Honors assignment resources2分钟
4 个练习
Week 4 quiz10分钟
Course assessment30分钟
Want to earn additional recognition from Autodesk?5分钟
Honors Assessment10分钟

审阅

来自MULTI-AXIS CNC TOOLPATHS的热门评论

查看所有评论

关于 Autodesk CAD/CAM for Manufacturing 专项课程

Manufacturers are under more pressure than ever to deliver better products faster, at lower cost, and with less waste. The “throw-it-over-the-wall” approach to product development worked well enough in the past. But to compete in the future, you’ll need to connect and automate design and manufacturing processes. Bringing the studio and shop floor together can reduce iterations and errors, enabling you to deliver better products faster. Computers can handle complex tasks to achieve things that are time consuming or in some cases impossible for the human mind. This is the case when we use digital data to create complex tool motions. As we learn how to use technology in this way, we unlock the potential of computer aided manufacturing (CAM). Through this specialization, you'll learn the foundations of CAD and toolpath generation, while developing your technical skills in Autodesk® Fusion 360™. Plus, by completing this Specialization, you’ll unlock an Autodesk Credential as further recognition of your success! The Autodesk Credential comes with a digital badge and certificate, which you can add to your resume and share on social media platforms like LinkedIn, Facebook, and Twitter. Sharing your Autodesk Credential can signal to hiring managers that you’ve got the right skills for the job and you’re up on the latest industry trends like CAD and CAM....
Autodesk CAD/CAM for Manufacturing

常见问题

  • Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:

    • The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.
    • The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.
  • 您注册课程后,将有权访问专项课程中的所有课程,并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中,您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容,可以免费旁听课程。

  • 如果订阅,您可以获得 7 天免费试听,在此期间,您可以取消课程,无需支付任何罚金。在此之后,我们不会退款,但您可以随时取消订阅。请阅读我们完整的退款政策

  • 是的,Coursera 可以为无法承担费用的学生提供助学金。通过点击左侧“注册”按钮下的“助学金”链接可以申请助学金。您可以根据屏幕提示完成申请,申请获批后会收到通知。您需要针对专项课程中的每一门课程完成上述步骤,包括毕业项目。了解更多

  • Visit this page to learn how to download Fusion 360 and to learn about the Autodesk Education license terms.

  • Professionals can purchase an annual or monthly commercial subscription to Fusion 360. For more information, visit the Fusion 360 subscribe page.

    Fusion 360 is also available for free to all users as a 30-day trial.

  • Yes! You'll earn a Course Certificate from Coursera and Autodesk upon completing this course, including all graded assignments.

    If you'd like to earn additional recognition from Autodesk, consider enrolling in Autodesk's CAD/CAM for Manufacturing. By completing this Specialization, you’ll unlock an Autodesk Credential as further recognition of your success! The Autodesk Credential comes with a digital badge and certificate, which you can add to your resume and share on social media platforms like LinkedIn, Facebook, and Twitter. Sharing your Autodesk Credential can signal to hiring managers that you’ve got the right skills for the job and you’re up on the latest industry trends.

  • Fusion 360 is both Mac and PC compatible. System requirements can be found here.l

  • Installation support for Fusion 360 can be found in the Autodesk Knowledge Network.

  • The Autodesk Fusion 360 gallery is a great resource for design inspiration. With Fusion 360, file sharing is easy. Follow the instructions for sharing a file in Fusion 360 and share your design in the gallery.

    Instructions.

    Gallery.

  • The Autodesk Certified User program offers students an opportunity to validate their Fusion 360 skills to prepare for professional careers in design and engineering. The certification exam is offered through 14,000 Certiport Testing Centers, and is available to students, educators, and professionals. To learn more about the Autodesk Certified user certification, visit www.certiport.com/acu.

  • If you are ready to learn new skills, build important relationships, and gain practical experience, then it’s time to embark on your path to becoming an Autodesk Student Expert. Start by entering the Student Expert Orientation.

  • Yes, you do have the option to audit the courses in this specialization, subject to Coursera's terms. Please note you must audit each course individually.

    When you audit a course: You'll be able to see most of the course materials for free, but you won't be able to submit assignments or get grades for your work. You won't be able to submit assignments for feedback or a grade. You also won't get a Course or Specialization Certificate.

    Visit the Coursera Help Center to learn more about auditing a course.

还有其他问题吗?请访问 学生帮助中心