Not infinite frequencies, because quantum effect start entering, but this is about

the frequencies we're normally interested in, so we call it a white noise.

There are two types of white noise. One is thermal noise that is due to

random thermal motion of carriers, because of thermal vibration of the

crystal lattice. And it is also called Johnson noise, or

Nyquist noise. When we have an ideal resistor R it is

supposed to be noiseless. But the real resistor, which is what I'm

showing you here, if you look across its terminals, because of this thermal noise,

shows a minute voltage. So you can represent a real resistor in

other words a noiseless resistor when the noiseless resistor in series with a noise

voltage short v sub t, t standing for thermal.

The prospect authenticity of this source can be shown to be 4kTR.

There are references for that in the book.

K is the Boltzmann constant, T is absolute temperature, R is the resistance

value. Instead of having a resistor in series

with a voltage source, you can take the thevenin equivalent of that and have a

noise resistor is in parallel with the current noise source.

So now from the Thevinin Norton transformation, you know that i sub t

must be V sub t over R. And therefore when you square both sides

and you take their mean value You get this result.

If you take the amount of mean square value over a bandwidth delta f and you

divide by delta f, you divide both sides by delta f, you get the corresponding

relation for sparse spacial densities that looks like this.

I have used this in the process. And therefore the final result is 4kT

times the conductance of the resistance. There is another type of white noise

called Shot noise, and this is associated with DC current.

It has to do with carriers crossing a potential barrier, and you get some noise

because of the discreetness of the arriving charges.

so since charges are individual electrons that pass, you can understand that they

appear a discrete charge packets. So you can represent that as a DC current

plus a minute noise, which is called Shot noise.

It can be shown that the par-spectral density of that type of noise is 2qi,

again references are in the book. Now, these two processes appear in nMOS

transistors, but more generally for an nMOS transistor, if you plot the

par-spectral density, you get the region where you have White noise, where the

par-spectral density is constant. But then you get another region.

A region where the par-spectral density goes up as you decrease the frequency.

And in fact, it turns out to be proportional to approximately 1 over f.

So this is called Flicker noise, or 1 over f noise,ah, it looks like a straight

line here because both the vertical and horizontal axis are logarithmic.

Now, if you extrapolate here and there, where the two asymptotes cross, we get

that's what called corner frequency. So, well above the corner frequency, we

have White noise. Well below the corner frequency we have

Flicker, or one over f noise. The total par-spectral density for the

noise current, is given by that for White noise plus the corresponding one for

Flicker noise. And in the log log plot, you can show

that this plus this gives you the solid line like this.

So in this very brief video we introduced noise in very simple terms, of course

this is a very subject. We just mentioned the minimum we need to

understand in order to able to follow the videos that will be presented next.

We talked about two types of noise, White noise and 1 over f noise.

And now we will start discussing each of these processes seperately as they apply

to nMOS transisstors.