Dr. Wayne Whiteman, PE

提供方

Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading

乔治亚理工学院

课程信息

67,150 次近期查看

This course explores the topic of solid objects subjected to stress and strain. The methods taught in the course are used to predict the response of engineering structures to various types of loading, and to analyze the vulnerability of these structures to various failure modes. Axial loading with be the focus in this course.
------------------------------
The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license.

学生职业成果

23%

通过此课程获得实实在在的工作福利

16%

加薪或升职

可分享的证书

完成后获得证书

100% 在线

立即开始，按照自己的计划学习。

可灵活调整截止日期

根据您的日程表重置截止日期。

完成时间大约为18 小时

英语（English）

字幕：阿拉伯语（Arabic）, 法语（French）, （欧洲人讲的）葡萄牙语, 中文（简体）, 意大利语, 越南语, 韩语, 德语（German）, 俄语（Russian）, 土耳其语（Turkish）, 英语（English）, 西班牙语（Spanish）

讲师

授课教师评分

4.7/5 （572 个评分）

Dr. Wayne Whiteman, PE

Senior Academic Professional

Woodruff School of Mechanical Engineering

300,623 个学生

12 门课程

学生职业成果

23%

通过此课程获得实实在在的工作福利

16%

加薪或升职

可分享的证书

完成后获得证书

100% 在线

立即开始，按照自己的计划学习。

可灵活调整截止日期

根据您的日程表重置截止日期。

完成时间大约为18 小时

英语（English）

提供方

乔治亚理工学院

The Georgia Institute of Technology is one of the nation's top research universities, distinguished by its commitment to improving the human condition through advanced science and technology.

教学大纲 - 您将从这门课程中学到什么

内容评分97%（14,254 个评分）

周

周 1

完成时间为 1 小时

Welcome

完成时间为 1 小时

1 个视频（总计 2 分钟）, 3 个阅读材料

1 个视频

Course Introduction2分钟

3 个阅读材料

Course Syllabus10分钟

Consent Form10分钟

Get More from Georgia Tech10分钟

完成时间为 3 小时

Stress and Strain Fundamentals

In this section, we will study the fundamentals of stress and strain as applied to Mechanics of Materials.

完成时间为 3 小时

8 个视频（总计 37 分钟）, 14 个阅读材料, 1 个测验

8 个视频

Module 1: General Analysis Approach4分钟

Module 2: Internal Forces due to External Loads2分钟

Module 3: Normal Stress/Shear Stress3分钟

Module 4: Maximum Normal and Shear Stress on Inclined Planes for Uniaxial Loading9分钟

Module 5: General State of Stress at a Point (3D)8分钟

Module 6: Two-Dimensional (2D) or Plane Stress2分钟

Module 7: Nominal (Engineering) Stress and True Stress4分钟

Module 8: Normal Strain2分钟

14 个阅读材料

Download Pdf Format Module 1: General Analysis Approach10分钟

Download Pdf Format Module 2: Internal Forces due to External Loads10分钟

Download Pdf Format: Module 3: Normal Stress/Shear Stress10分钟

Module 3 Worksheet Solution10分钟

Download Pdf Format Module 4: Maximum Normal and Shear Stress on Inclined Planes for Uniaxial Loading10分钟

Module 4 Worksheet Solution10分钟

Download Pdf Format Module 5: General State of Stress at a Point (3D)10分钟

Download Pdf Format Module 6: Two-Dimensional (2D) or Plane Stress10分钟

Download Pdf Format Module 7: Nominal (Engineering) Stress and True Stress10分钟

Module 7 Worksheet Solution10分钟

Download Pdf Format Module 8: Normal Strain10分钟

Module 8 Worksheet Solution10分钟

Solution to Quiz Week One10分钟

Earn a Georgia Tech Badge/Certificate/CEUs10分钟

1 个练习

Quiz on Stress and Strain Fundamentals30分钟

周

周 2

完成时间为 3 小时

Stress-Strain Diagrams, Material Properties, and Shear Stress and Strain

In this section, we will develop stress-strain diagrams, discuss material properties, and look more in depth at shear stress and strain.

完成时间为 3 小时

7 个视频（总计 35 分钟）, 11 个阅读材料, 1 个测验

7 个视频

Module 9: Tension Test and Stress-Strain Diagram10分钟

Module 10: Internal Properties and Hooke’s Law4分钟

Module 11: 0.2% Offset Yield Stress3分钟

Module 12: Strain Hardening/Permanent Set1分钟

Module 13: Poisson’s Ratio6分钟

Module 14:Shear Stress/2D Pure Shear4分钟

Module 15: Shear Strain4分钟

11 个阅读材料

Download Pdf Format Module 9: Tension Test and Stress-Strain Diagram10分钟

Download Pdf Format Module 10: Internal Properties and Hooke’s Law10分钟

Module 10 Worksheet Solution10分钟

Download Pdf Format Module 11: 0.2% Offset Yield Stress10分钟

Module 11 Worksheet Solution10分钟

Download Pdf Format Module 12: Strain Hardening/Permanent Set10分钟

Download Pdf Format Module 13: Poisson’s Ratio10分钟

Module 13 Worksheet Solution10分钟

Download Pdf Format Module 14:Shear Stress/2D Pure Shear10分钟

Download Pdf Format Module 15: Shear Strain10分钟

Solution to Quiz Week Two10分钟

1 个练习

Quiz on Stress-Strain Diagrams, Material Properties, and Shear Stress and Strain30分钟

周

周 3

完成时间为 4 小时

Stresses on Inclined Planes

In this section, we will develop the stress transformation equations for inclined planes and introduce Mohr’s Circle for Plane Stress

完成时间为 4 小时

11 个视频（总计 68 分钟）, 14 个阅读材料, 1 个测验

11 个视频

Module 16:Stresses on Inclined Planes – Sign Convention5分钟

Module 17: Transformation Equations for Plane Stress8分钟

Module 18: Principal Stresses/Principal Planes5分钟

Module 19: Principal Stresses/Principal Planes (cont.)2分钟

Module 20: Maximum and Minimum In-Plane Principal Stresses7分钟

Module 21: Maximum In-Plane Shear Stress5分钟

Module 22: Introduction to Mohr’s Circle4分钟

Module 23: Mohr’s Circle for Plane Stress5分钟

Module 24: Determine Principal Stresses, Principal Planes, and Maximum Shear Stress using Mohr’s Circle9分钟

Module 25: Stresses on any given plane using Mohr’s Circle6分钟

Module 26: Principal Stresses and Principal Planes by solving Eigenvalue Problem5分钟

14 个阅读材料

Download Pdf Format Module 16:Stresses on Inclined Planes – Sign Convention10分钟

Download Pdf Format Module 17: Transformation Equations for Plane Stress10分钟

Module 17 Worksheet Solution10分钟

Download Pdf Format Module 18: Principal Stresses/Principal Planes10分钟

Download Pdf Format Module 19: Principal Stresses/Principal Planes (cont.)10分钟

Download Pdf Format Module 20: Maximum and Minimum In-Plane Principal Stresses10分钟

Download Pdf Format Module 21: Maximum In-Plane Shear Stress10分钟

Module 21 Worksheet Solution10分钟

Download Pdf Format Module 22: Introduction to Mohr’s Circle10分钟

Download Pdf Format Module 23: Mohr’s Circle for Plane Stress10分钟

Download Pdf Format Module 24: Determine Principal Stresses, Principal Planes, and Maximum Shear Stress using Mohr’s Circle10分钟

Download Pdf Format Module 25: Stresses on any given plane using Mohr’s Circle10分钟

Download Pdf Format Module 26: Principal Stresses and Principal Planes by solving Eigenvalue Problem10分钟

Solution to Quiz Week Three10分钟

1 个练习

Quiz on Stresses on Inclined Planes30分钟

周

周 4

完成时间为 4 小时

Stress concentrations, Mohr’s Circle for Plane Strain, and measuring strains

In this section, we will learn about stress concentrations, and discuss plane strain, develop Mohr’s Circle for Plane Strain, and explore methods of measuring strain.

完成时间为 4 小时

11 个视频（总计 68 分钟）, 12 个阅读材料, 1 个测验

11 个视频

Module 27: Stress Concentration Factors/Saint-Venant’s Principle5分钟

Module 28: Determine Maximum Stress at Discontinuities using Stress Concentration Factors8分钟

Module 29: Two-Dimensional (2D) or Plane Strain5分钟

Module 30: Transformation Equations for Plane Strain8分钟

Module 31: Transformation Equations for Plane Strain (cont.)1分钟

Module 32: Mohr’s Circle for Plane Strain2分钟

Module 33: Determine Principal Strains, Principal Planes, and Maximum Shear Strain using Mohr’s Circle9分钟

Module 34: Strains on any given plane using Mohr’s Circle6分钟

Module 35: Find Strains using Experimental Analysis Techniques5分钟

Module 36: Find In-Plane Strains using Strain Gage Measurements7分钟

Module 37: Find Principal Strains, Maximum Shear Strain, and Principal7分钟

12 个阅读材料

Download Pdf Format Module 27: Stress Concentration Factors/Saint-Venant’s Principle10分钟

Download Pdf Format Module 28: Determine Maximum Stress at Discontinuities using Stress Concentration Factors10分钟

Download Pdf Format Module 29: Two-Dimensional (2D) or Plane Strain10分钟

Download Pdf Format Module 30: Transformation Equations for Plane Strain10分钟

Download Pdf Format Module 31: Transformation Equations for Plane Strain (cont.)10分钟

Download Pdf Format Module 32: Mohr’s Circle for Plane Strain10分钟

Download Pdf Format Module 33: Determine Principal Strains, Principal Planes, and Maximum Shear Strain using Mohr’s Circle10分钟

Download Pdf Format Module 34: Strains on any given plane using Mohr’s Circle10分钟

Download Pdf Format Module 35: Find Strains using Experimental Analysis Techniques10分钟

Download Pdf Format Module 36: Find In-Plane Strains using Strain Gage Measurements10分钟

Download Pdf Format Module 37: Find Principal Strains, Maximum Shear Strain, and Principal10分钟

Solution to Quiz Week Four10分钟

1 个练习

Quiz on Stress concentrations, Mohr’s Circle for Plane Strain, and measuring strains30分钟

周

周 5

完成时间为 3 小时

Generalized Hooke’s Laws, Factor of Safety, Non-linear behavior and Plasticity, Statically Indeterminate Structures, and Thermal Effects

In this section, we will conclude the course by discussing the topics of the generalize Hooke’s Laws for Isotropic materials, factors of safety, nonlinear behavior and plasticity, statically indeterminate structures, and thermal effects in mechanics of materials.

完成时间为 3 小时

9 个视频（总计 57 分钟）, 12 个阅读材料, 1 个测验

9 个视频

Module 38: Generalized Hooke’s Laws for Isotropic Materials8分钟

Module 39: Modulus of Elasticity, Modulus of Rigidity, and Poisson’s Ratio relationship for Isotropic Materials5分钟

Module 40: Factor of Safety4分钟

Module 41: Design to meet specified Factor of Safety5分钟

Module 42: Idealized Elastoplastic Material Assumption2分钟

Module 43: Solve a Statically Indeterminate Structure under Axial Loading14分钟

Module 44: Temperature Effects on Engineering Materials5分钟

Module 45: Solve an Engineering Problem with Thermal Effects7分钟

Module 46: Course Conclusion2分钟

12 个阅读材料

Download Pdf Format Module 38: Generalized Hooke’s Laws for Isotropic Materials10分钟

Download Pdf Format Module 39: Modulus of Elasticity, Modulus of Rigidity, and Poisson’s Ratio relationship for Isotropic Materials10分钟

Download Pdf Format Module 40: Factor of Safety10分钟

Download Pdf Format Module 41: Design to meet specified Factor of Safety10分钟

Module 41 Worksheet Solution10分钟

Download Pdf Format Module 42: Idealized Elastoplastic Material Assumption10分钟

Download Pdf Format Module 43: Solve a Statically Indeterminate Structure under Axial Loading10分钟

Download Pdf Format Module 44: Temperature Effects on Engineering Materials10分钟

Dowload Pdf Format Module 45: Solve an Engineering Problem with Thermal Effects10分钟

Solution to Quiz Week five10分钟

Download Pdf Format Module 46: Course Conclusion10分钟

Where to go from here10分钟

1 个练习

Quiz on Generalized Hooke’s Laws, Factor of Safety, Non-linear behavior and Plasticity, Statically Indeterminate Structures, and Thermal Effects30分钟

常见问题

我什么时候能够访问课程视频和作业？
讲座和作业的访问权限取决于您的注册类型。如果您以旁听模式参加课程，则可以免费查看大多数课程资料。要访问评分作业并获得证书，您需要在旁听期间或之后购买证书体验。如果看不到旁听选项：
课程可能不提供旁听选项。您可以尝试免费试用，也可以申请助学金。
课程可能会改为提供'完整课程，没有证书'。通过此选项，您可以查看所有课程材料、提交所要求的作业，以及获得最终成绩。这也意味着您将无法购买证书体验。
我购买证书后会得到什么？
您购买证书后，将有权访问所有课程材料，包括评分作业。完成课程后，您的电子课程证书将添加到您的成就页中，您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容，可以免费旁听课程。
Is financial aid available?
是的，Coursera 可以向无法承担学费的学生提供助学金。点击左侧‘注册’按钮下的‘助学金’链接即可申请助学金。您可以根据屏幕提示完成申请，申请获批后会收到通知。了解详情。

还有其他问题吗？请访问学生帮助中心。

Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading

Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading

课程信息

学生职业成果

23%

16%

讲师

Dr. Wayne Whiteman, PE

学生职业成果

23%

16%

提供方

乔治亚理工学院

教学大纲 - 您将从这门课程中学到什么

周 1

Welcome

Stress and Strain Fundamentals

周 2

Stress-Strain Diagrams, Material Properties, and Shear Stress and Strain

周 3

Stresses on Inclined Planes

周 4

Stress concentrations, Mohr’s Circle for Plane Strain, and measuring strains

周 5

Generalized Hooke’s Laws, Factor of Safety, Non-linear behavior and Plasticity, Statically Indeterminate Structures, and Thermal Effects

审阅

来自MECHANICS OF MATERIALS I: FUNDAMENTALS OF STRESS & STRAIN AND AXIAL LOADING的热门评论

常见问题

热门在线课程

热门在线专项课程

在线证书

在线学位课程

Coursera

社区

更多

Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading

Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading

课程信息

学生职业成果

23%

16%

讲师

Dr. Wayne Whiteman, PE

学生职业成果

23%

16%

提供方

乔治亚理工学院

教学大纲 - 您将从这门课程中学到什么

周 1

Welcome

Stress and Strain Fundamentals

周 2

Stress-Strain Diagrams, Material Properties, and Shear Stress and Strain

周 3

Stresses on Inclined Planes

周 4

Stress concentrations, Mohr’s Circle for Plane Strain, and measuring strains

周 5

Generalized Hooke’s Laws, Factor of Safety, Non-linear behavior and Plasticity, Statically Indeterminate Structures, and Thermal Effects

审阅

来自MECHANICS OF MATERIALS I: FUNDAMENTALS OF STRESS & STRAIN AND AXIAL LOADING的热门评论

常见问题

Coursera Footer

热门在线课程

热门在线专项课程

在线证书

在线学位课程

Coursera

社区

更多