课程信息

2,044 次近期查看

100% 在线

立即开始,按照自己的计划学习。

可灵活调整截止日期

根据您的日程表重置截止日期。

中级

完成时间大约为12 小时

建议:4 weeks of study...

英语(English)

字幕:英语(English)

您将学到的内容有

  • Check
    Describe the simulation workflow in Fusion 360.
  • Check
    Summarize the use cases for various types of simulation studies.
  • Check
    Demonstrate knowledge and skills in more advanced Fusion 360 CAD and CAE skills.
  • Check
    Explain and identify simulation results

您将获得的技能

AutodeskSimulationFusion 360Engineering DesignMechanical Engineering

100% 在线

立即开始,按照自己的计划学习。

可灵活调整截止日期

根据您的日程表重置截止日期。

中级

完成时间大约为12 小时

建议:4 weeks of study...

英语(English)

字幕:英语(English)

教学大纲 - 您将从这门课程中学到什么

1

1

完成时间为 5 小时

Static Stress Simulation

完成时间为 5 小时
21 个视频 (总计 66 分钟), 8 个阅读材料, 2 个测验
21 个视频
Get the software2分钟
Week 1 overview40
Starting a static stress simulation4分钟
Using simplify4分钟
Selecting study materials2分钟
Creating custom materials6分钟
Defining structural constraints3分钟
Using a bolted connection2分钟
Adding a structural load3分钟
Defining multiple load conditions2分钟
Solving contact sets3分钟
Generating mesh and mesh control7分钟
Solving a simulation2分钟
Reviewing simulation results10分钟
Practice exercise 1 overview21
Practice exercise 1 solution1分钟
Practice exercise 2 overview15
Practice exercise 2 solution1分钟
Practice exercise 3 overview26
Practice exercise 3 solution3分钟
8 个阅读材料
Static Stress Simulation resources5分钟
About the discussion forum5分钟
Online learning communities and social media10分钟
Getting to know your classmates10分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 1 challenge exercise1 小时 30 分
2 个练习
Pre-course questions10分钟
Week 1 quiz10分钟
2

2

完成时间为 4 小时

Using Shape Optimization to Drive a Design

完成时间为 4 小时
15 个视频 (总计 53 分钟), 5 个阅读材料, 1 个测验
15 个视频
Defining common parameters for a shape optimization6分钟
Defining shape preservation regions2分钟
Detailing optimization criteria3分钟
Reviewing a shape optimization study4分钟
Promoting a mesh to create a new design3分钟
Design creation to match a shape optimization mesh8分钟
Validation through static stress simulation4分钟
Review and refine a design7分钟
Practice exercise 1 overview16
Practice exercise 1 solution3分钟
Practice exercise 2 overview15
Practice exercise 2 solution3分钟
Practice exercise 3 overview22
Practice exercise 3 solution3分钟
5 个阅读材料
Using Shape Optimization to Drive a Design resources5分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 2 challenge exercise1 小时 30 分
1 个练习
Week 2 quiz10分钟
3

3

完成时间为 5 小时

Nonlinear Response, Buckling and Modal Frequencies

完成时间为 5 小时
20 个视频 (总计 64 分钟), 5 个阅读材料, 1 个测验
20 个视频
Define and solve a nonlinear static stress study6分钟
Review nonlinear results2分钟
Refine the model and rerun the study3分钟
Define and solve a buckling study2分钟
Review and refine a buckling study2分钟
Review a final buckling study1分钟
Define and solve a modal frequency study3分钟
Review modal results2分钟
Modify the model to reduce the mass participation5分钟
Create a rigid body connector4分钟
Explore point masses9分钟
Apply additional force types4分钟
Simulate pressure7分钟
Practice exercise 1 overview15
Practice exercise 1 solution1分钟
Practice exercise 2 overview18
Practice exercise 2 solution1分钟
Practice exercise 3 overview18
Practice exercise 3 solution1分钟
5 个阅读材料
Nonlinear Response, Buckling and Modal Frequencies resources5分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 3 challenge exercise2 小时 30 分
1 个练习
Week 3 quiz10分钟
4

4

完成时间为 7 小时

Thermal and Thermal Stress

完成时间为 7 小时
17 个视频 (总计 73 分钟), 5 个阅读材料, 3 个测验
17 个视频
Prepare a model for thermal simulation4分钟
Setting up thermal study materials2分钟
Understanding and applying types of thermal loads6分钟
Solving a thermal study and reviewing the results8分钟
Cloning a simulation model11分钟
Setting up a thermal stress study4分钟
Setting up mesh and contacts4分钟
Modifying a thermal stress study6分钟
Event simulation setup8分钟
Event simulation results review6分钟
Practice exercise 1 overview13
Practice exercise 1 solution2分钟
Practice exercise 2 overview15
Practice exercise 2 solution2分钟
Practice exercise 3 overview20
Practice exercise 3 solution2分钟
5 个阅读材料
Thermal and Thermal Stress resources5分钟
Practice exercise 1 instructions30分钟
Practice exercise 2 instructions30分钟
Practice exercise 3 instructions30分钟
Week 4 challenge exercise1 小时 30 分
2 个练习
Week 4 quiz10分钟
Final assessment40分钟

讲师

关于 Autodesk

Today's challenges will be solved by tomorrow's designers. That's why Autodesk gives students, educators, and educational institutions free access to our design software, creativity apps, and learning resources. A market leader for more than 30 years, Autodesk offers the broadest and deepest portfolio of products in the design world. Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges....

关于 Autodesk CAD/CAM/CAE for Mechanical Engineering 专项课程

The demand placed on today’s engineers goes above and beyond the job description. Products have become complex and engineers are more frequently asked to leave specialized roles and to take on a wide variety of tasks that are beyond their traditional responsibilities. These tasks are centered on form, fit, and function. Engineers need to factor in broader concerns such as cost, procurement, sustainability, manufacturability, and serviceability. Their role has moved away from an individual responsibility to working as part of a collaborative engineering team, executing tradeoffs with both engineering and business stakeholders to meet project goals. These trends have forced today’s engineers to broaden their skillset to be successful. Engineers today are required to be on the cutting edge of design innovation. This means not only understanding engineering principles that govern the title and role, but also perfecting the toolsets needed to design and develop products. Through this specialization, you’ll learn the foundations of applying computer aided design (CAD), computer aided engineering (CAE), and manufacturing principles while developing your technical skills within Autodesk Fusion 360....
Autodesk CAD/CAM/CAE for Mechanical Engineering

常见问题

  • 注册以便获得证书后,您将有权访问所有视频、测验和编程作业(如果适用)。只有在您的班次开课之后,才可以提交和审阅同学互评作业。如果您选择在不购买的情况下浏览课程,可能无法访问某些作业。

  • 您注册课程后,将有权访问专项课程中的所有课程,并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中,您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容,可以免费旁听课程。

还有其他问题吗?请访问 学生帮助中心