This course is for you if you are looking to dive deeper into Six Sigma or strengthen and expand your knowledge of the basic components of green belt level of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes and performance. This course will take you deeper into the principles and tools associated with the "Improve" and "Control" phases of the DMAIC structure of Six Sigma.
提供方
课程信息
14,453 次近期查看
学生职业成果
14%
通过此课程获得实实在在的工作福利
17%
加薪或升职
学生职业成果
14%
通过此课程获得实实在在的工作福利
17%
加薪或升职
可分享的证书
完成后获得证书
100% 在线
立即开始，按照自己的计划学习。
第 4 门课程（共 4 门）
可灵活调整截止日期
根据您的日程表重置截止日期。
中级
完成时间大约为8 小时
建议：5 hours/week
英语（English）
字幕：英语（English）, 罗马尼亚语
教学大纲 - 您将从这门课程中学到什么
完成时间为 2 小时
Root Cause Analysis
In this module, Dr. Bill Bailey will cover root cause analysis, which includes the 7-step model, counter measure, and "single-minute exchange of die" (SMED). This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous belt material. This refresher area does not serve as a "replacement" for taking the material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
完成时间为 2 小时
12 个视频 （总计 51 分钟）, 5 个阅读材料, 2 个测验
12 个视频
Purpose of Lean5分钟
Cause and Effect Diagrams1分钟
5 Whys4分钟
FMEA - pt15分钟
FMEA - pt25分钟
FMEA - pt36分钟
Introduction1分钟
7-Step Model4分钟
More Tools for Root Cause4分钟
Counter Measures4分钟
Single-minute Exchange of Die (SMED)5分钟
5 个阅读材料
Highly-Recommended Text10分钟
Introduction - Recommended Reading10分钟
7-Step Model - Recommended Reading10分钟
Counter Measures - Recommended Reading10分钟
SMED - Recommended Reading10分钟
2 个练习
Root Cause Analysis Practice Quiz20分钟
Root Cause Analysis Graded Quiz20分钟
完成时间为 2 小时
Lean Tools
In this module, Dr. Bill Bailey will cover a more advance use of lean tools, including a look at the lean philosophy, lean goals, and lean systems. You will also be exposed to three important case studies. This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous yellow belt material. This refresher area does not serve as a "replacement" for taking the yellow belt material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
完成时间为 2 小时
17 个视频 （总计 79 分钟）
17 个视频
Poka Yoke3分钟
Removing Waste5分钟
Kaizan4分钟
Kan Ban8分钟
5S4分钟
Process Mapping - vid16分钟
Process Mapping - vid23分钟
Value Stream Mapping4分钟
Total Productive Maintenance, Visual Management, & SMED4分钟
Introduction1分钟
Lean Philosophy5分钟
Lean Goals4分钟
Lean Tools & Systems5分钟
Case Study 14分钟
Case Study 23分钟
Case Study 36分钟
2 个练习
Lean Tools Practice Quiz20分钟
Lean Tools Graded Quiz20分钟
完成时间为 1 小时
Statistical Process Control (SPC) & Control Plan
In this module, Dr. David Cook will cover statistical process control (SPC) and control plan.
完成时间为 1 小时
5 个视频 （总计 23 分钟）, 2 个阅读材料, 2 个测验
5 个视频
Statistical Process Control - Part 23分钟
Statistical Process Control - Part 32分钟
Statistical Process Control - Part 45分钟
Control Plan6分钟
2 个阅读材料
Statistical Process Control - Recommended Reading10分钟
Control Plan Recommended Reading10分钟
2 个练习
SPC and Control Plan Practice Quiz18分钟
SPC and Control Plan Graded Quiz20分钟
完成时间为 1 小时
Lean Tools for Process Control
In this module, Dr. David Cook will cover lean tools for process control.
完成时间为 1 小时
2 个视频 （总计 7 分钟）, 1 个阅读材料, 2 个测验
1 个阅读材料
Lean Tools and Process Control - Recommended Reading10分钟
2 个练习
Lean Tools for Process Control Practice Quiz20分钟
Lean Tools for Process Control Graded Quiz20分钟
审阅
4.7
来自SIX SIGMA ADVANCED IMPROVE AND CONTROL PHASES的热门评论
由 RK 提供Dec 11, 2017
The specialization gives a very good idea about lean sigma . however, it would ave been It would have been interesting if a section about service quality applications was added in each of the courses.
由 LB 提供Feb 16, 2020
Overall, courses 1-3 were great! I think the final course should have more monitoring from those who are accomplished in Six Sigma.
由 SS 提供Jan 17, 2020
very nice and better content, awesome trainers and over all a very good experience in learning DMAIC. Highly recommended.
由 EL 提供Apr 28, 2018
SImplified version of the Lean Six Sigma book yet contains a significant amount of information.
由 JX 提供May 11, 2019
Most of the contents are useful, but the requirement for the project is a bit too much.
由 SD 提供Jul 13, 2019
Amazing course. You learn a lot about quality control and other tips and tricks
由 DN 提供Sep 9, 2019
Very intense but well organised and taught. Easy to follow and learn.
由 M 提供Feb 20, 2019
Very Very interesting course. Deserved to be taken
关于 乔治亚大学系统
The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System.
关于 六标准差绿带 专项课程
This specialization is for you if you are looking to learn more about the more advanced components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance.
In this specialization, you will learn proven principles and tools specific to six sigma and lean.
This is a sequential, linear designed specialization that covers a more advanced level of content (at the "green belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is the second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt.
The proper sequence of this specialization is:
Course #1 - Six Sigma and the Organization (Advanced)
Course #2 - Six Sigma Advanced Define and Measure Phase
Course #3 - Six Sigma Advanced Analyze Phase
Course #4 - Six Sigma Advanced Improve and Control Phase
At the end of Course #4 (Six Sigma Advanced Improve and Control Phase), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization.
It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma, but should assist in better preparation for such professional accreditation testing.
常见问题
我什么时候能够访问课程视频和作业？
注册以便获得证书后，您将有权访问所有视频、测验和编程作业（如果适用）。只有在您的班次开课之后，才可以提交和审阅同学互评作业。如果您选择在不购买的情况下浏览课程，可能无法访问某些作业。
我订阅此专项课程后会得到什么？
您注册课程后，将有权访问专项课程中的所有课程，并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中，您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容，可以免费旁听课程。
退款政策是如何规定的？
有助学金吗？
还有其他问题吗？请访问 学生帮助中心。
